IST Solar Training included all engineering design software / tools

IST Solar MMS Structural Design & Analysis Tool

Full walkthrough of:
1 — Project Input: Enter site parameters including wind zone (IS 875 Part 3), seismic zone (IS 1893), roof height, parapet height, terrain category, panel dimensions/weight, tilt angle, row spacing, steel grade (Fe 250/350/410), concrete grade (M20/M25/M30), and tilt system (fixed or adjustable). Three presets available: Residential 10kW, Commercial 100kW, Industrial 500kW.
2 — Structure Type: Select from Flat RCC Rooftop, Pole-Mounted, Elevated/High-Rise, or Triangle Bracket. Configure front/rear leg heights (rear leg auto-calculated from tilt angle), bay spacing, pole height, and row count. Live summary shows total panels, array area, row length, and geometry.
3 — Load Analysis: Full IS 875 Part 3 wind analysis (Vb → k2 → Vz → pz → Cf → Fw) and IS 1893 seismic analysis (Z → Ah → base shear). Generates all load combinations (LC1–LC4) per IS 800 Table 4, identifies governing lateral load.
4 — Member Design: IS 800:2007 limit state checks for bending (Cl 8.2), shear (Cl 8.4), compression/buckling (Cl 7.1), deflection (L/300), and connection bolt capacity. Auto-selects adequate section from database. Pass/Fail with utilisation percentages.
5 — Foundation: IS 456:2000 RCC concrete block design — block sizing, bearing capacity, overturning stability (FoS ≥ 1.5), minimum steel area, chemical anchor selection, and concrete grade checks. Total block count calculated.
6 — Engineering Drawing: Four views — front elevation, foundation layout plan, cross-section, and connection detail — all auto-generated from your input parameters. Download as PNG.
7 — Component Database: steel sections (ISMC, ISA, SHS, RHS), fasteners & bolts (IS 1367), solar panels, and foundation blocks. All with full specifications.
8 — Full Report: STAAD-style engineering report covering all 11 sections including code references, load tables, material specs, member check summary, quality assurance checklist. Print or copy to clipboard.

IST Pitched Roof Solar MMS Structural Design & Analysis Tool

1 — Project Input: Wind standard selection (ASCE 7-10/16 or IS 875 Part 3), basic wind speed, exposure/terrain category, seismic zone, roof height, pitch angle, rafter span, panel gap (locked to 150mm minimum per IEC 62938), panel dimensions/weight, rail and hook spacing, steel grade, rail material (Al 6005A-T5, 6063-T6, Steel, SS316), and snow zone.
2 — Roof Type: Six roof surfaces — Clay/Concrete Tiles, Metal Sheet, Corrugated Sheet, Asphalt Shingles, Slate, and Standing Seam Metal. Each auto-fills the correct dead load, hook type, waterproofing method, and tile overlap. Standing seam is highlighted as no-penetration (best option).
3 — Load Analysis: Complete wind analysis per ASCE 7-10/16 or IS 875 Part 3 including uplift and download coefficients specific to pitched roof panels, plus dead load, snow load (IS 875 Part 4), seismic base shear (IS 1893), and all five load combinations per IS 800 Table 4.
4 — Member Design: IS 800:2007 limit state checks for aluminium rail — bending (Cl 8.2), shear (Cl 8.4), and deflection (L/250). Auto-selects adequate rail section from database with utilisation percentages and pass/fail.
5 — Roof Hooks: Pull-out and shear capacity checks for the selected hook type with factor of safety ≥ 2.0. Waterproofing specification and galvanic isolation details per IEC 62938.
6 — Drawings: Four views — side elevation (showing pitch angle, 150mm gap, rails, hooks), top plan view (array layout with hooks), rail layout with hook positions and dimensions, and hook/bracket connection detail. All download as PNG.
7 — Component Database: Full CRUD for Rails/Profiles, Roof Hooks & Clamps, Mid/End Clamps, Fasteners, and Solar Panels with all specifications.
8 — Full Report: 13-section STAAD-style report covering all codes (ASCE 7, IS 875, IS 800, IS 1893, IEC 62938, IEC 62548), load tables, member design, hook design, installation notes, and quality checklist. Print or copy to clipboard.

Reputation and reviews:

For comprehensive solar business training, consider programs focused on solar PV technology and business management, especially those offered by the Institute of Solar Technology (IST).

Reviews and ratings of educational institutions are crucial for gauging student satisfaction and overall quality. They provide valuable insights into areas of strength and areas needing improvement, helping institutions enhance their offerings and better serve their students.
Check online reviews and ratings of the institutes to gauge their quality and student satisfaction.

Visit: IST Prestigious Alumni Feedback